Online Store
Product Categories
click to enlarge
LED Light Kit
These kits provides a separate Red or clear LED bulb (one for each side) that is installed into the red tail light area of the towed vehicle. Each is powered by the RV and does not interfere with the existing towed vehicle tail light wiring. Each bulb provides taillight, brake and signal light functions. All the wiring and connectors are included to feed power from the front of the towed car to each individual taillight. (Note: It does not include the four or six wire cable connector. It takes up much less space than the Bulb and socket kit). BX88267 - BX88269. MSRP: $110 US & $121
PRICE CAD 0
click to enlarge
BX8848 - 4 Diode Wiring Kit
This 4 diode kit allows the existing towed vehicle taillight & brake bulb (or LED display) to be utilized when towing. The kit consists of sufficient wire to run from the front of the towed vehicle to the rear and wiring to connect to the vehicle’s existing wiring to power the taillight and left and right brake light which can act as the turn signal. Diodes allow two power sources (RV & towed vehicle) to power a single bulb (or display) while preventing power from flowing where it should not, (i.e. from the RV into the towed vehicle’s wiring system). This ensures complete separation of the power sources. This kit is utilized where the towed vehicle utilizes LED displays for its rear light functions or where the size of the taillight housing does not permit the installation of an additional bulb. MSRP: $80 US & $88 CDN
PRICE CAD 0
click to enlarge
BX8862 - 6 Wire Coiled Cable Extension with Two Connectors
This 6 wire cable extension allows the left and right brake and signal, together with the tail lights to function when powered by the RV. I addition to a ground wire there are two additional wires which can be utilized for many purposes including transferring power to (or from) a braking system and/or providing power to charge the towed vehicle battery. Wiring is in a tough silicone covering and coiled to reduce damage. Two cable connectors are included to be installed on the towed vehicle and RV and both feature secure locking of the cable ends for trouble free towing. MSRP: $90 US & $99 CDN
PRICE CAD 0
click to enlarge
BX8869 - Bulb and Socket Tail Light Wiring Kit
This kit provides a separate bulb and socket (one for each side) that is installed into the red tail light area of the towed vehicle. It is powered by the RV and does not interfere with the existing towed vehicle tail light wiring. It provides taillight, brake and signal light functions. All the wiring and connectors are included to feed power from the front of the towed car to each individual taillight. (Note: It requires sufficient clearance for the socket in the taillight housing. It does not include the four or six wire cable connector). MSRP: $60 US & $66 CDN
PRICE CAD 0
click to enlarge
Drop Receivers
Drop/Rise Receivers: These accessories provide a method of aligning the baseplate tabs with the tow bar lugs. Ideally the RV and tow vehicle connection points should be level. A differential of up to 4” is allowable (with the RV being higher). Various models for height differences and carrying capacity are available. MSRP Range: $130 to $220 US & $143 to $242 CDN
PRICE CAD 0
click to enlarge
BasePlates
Baseplates provide the load and force equalizing attachment points for the tow bar. Most are directly installed to the vehicle frame and supply safety cable attachment and light socket attachment points. Permanent Safety Cables are included for 2007 and newer vehicles. Various Part Numbers (dependent upon fit) MSRP: $445 US & $490
PRICE CAD 0
click to enlarge
Aladdin Tow Bar
Lighter Weight for RVers! The Aladdin™ tow bar is the lightest tow bar in the Blue Ox line. Its direct-connect, fold-away design is a proven favorite among towing enthusiasts. Class III tow bar, for use with towed vehicles up to 7,500 lbs Easy fold-away aluminum tow bar mounts and stores on back of RV Self-aligning, with 3 axis swivel design. BX4325 MSRP: $995 US & $1095 CDN
PRICE CAD 0
click to enlarge
Aventa LX Tow Bar
Best for most RVers! The Aventa™ LX has 10,000 lb capacity and a ball in socket design that incorporates a spherical joint instead of the traditional bolted together flex joint. This cutting edge design reduces wear points and allows for an extremely strong and durable attachment between the coach and the towed vehicle. BX7445 MSRP: $895 US & $985 CDN
PRICE CAD 0
Ordering and Return Policy Privacy Links Contact
Design by Lifeline Design
