1-877-266-5398

 


We designed the RVing FuseSwitch™ to solve the problem of having to remove and re-insert a fuse each time you tow. Many vehicle manufacturers require one or more fuses to be removed when flat towing the vehicle. With 5 versions we cover most tow vehicles that have a fuse removal requirement.  After a simple do-it-yourself installation, you simply flip the switch and tow, then turn the switch on when you are finished towing.  It couldn't be simpler!  Visit our RVing FuseSwitchTM Resource page for more information including installation videos. 

  California Proposition 65 Warning:

WARNING: These products contain chemicals including, including lead, antimony trioxide and carbon black, known to the State of California to cause cancer and birth defects or other reproductive harm. WASH HANDS AFTER INSTALLATION OR HANDLING

 


Which RVing FuseSwitch™ is right for my vehicle?
Click Here for our Vehicle Directory and Application Chart.


RVing FuseSwitch™

[object HTMLInputElement]

FSW-1MS  RVing FuseSwitch™with Short Leads designed to be used in vehicles with the small fuse panel cover directly over the vehicle fuse panel. This version is also excellent for use in under hood fuse panel applications up to 20 amps. The Switch is usually mounted on the outer cover.

Click Here to place order

$54.95 US & CDN.

RVing FuseSwitch Video Page

 

 

 


RVing FuseSwitch™

[object HTMLInputElement]

FSW-1M  RVing FuseSwitch™with Long Leads designed to be used in all vehicles with recessed, hard to get at fuse panels or on vehicles with large fuse panel covers that would make the shorter version difficult to install.

Click Here to place order

$64.95 US & CDN

RVing FuseSwitch Video Page

 

 

 


RVing FuseSwitch™

[object HTMLInputElement]

FSW-2M RVing FuseSwitch™is a Long Leads version with two mini fuse holders designed to be used in vehicles where at least two fuses are to be removed. Combine this one with one of the single versions for use in applications which specify three fuses are to be removed.

Click Here to place order

$84.95 US & CDN


RVing FuseSwitch™

[object HTMLInputElement]

FSW-2GM RVing FuseSwitch™is a 30" (76 cm) Long Lead version with two ATO/ATC fuse holders designed to be used in 2013-2015 GM vehicles where two ATO/ATC fuses are to be removed from the Battery Box located under the rear floor, behind the front passenger seat. Combine this one with a High Current version for use in these GM vehicle applications which specify three fuses are to be removed.

Click Here to place order

$94.95 US & CDN


High Current RVing FuseSwitch™

[object HTMLInputElement]

FSW-HD1 High Current RVing FuseSwitch™ This version is specifically designed for vehicles that require the removal of a 20 to 50 amp FMX (JCASE) fuse that is rectangular and about 1/2" x 7/16" (13mm x 11mm) in size and located in the under hood covered fuse box.

Click Here to place order

$159.95 US & CDN

[object HTMLInputElement]

 

 

 

Information related to some GM vehicles


Note:

The vast majority of current vehicles use an ATM style mini fuse (about 5/8" (15.9mm) in size with 1/8" (3.2mm) pointed fuse tabs). Some vehicles use a MicroMini fuse (see photos under the RVing FuseSwitchTM information tab) and our  RVing FuseSwitchTM will fit the fuse panel, however a similar rated ATM Mini fuse will need to be inserted into the RVing FuseSwitchTM harness.

Some older vehicles, and the GMC Acadia, Chevrolet Traverse and Buick Enclave use the larger ATO/ATC fuse (about ¾" (19 mm) in size and ¼" (6.4mm) fuse tabs). The single circuit versions are available on a special order basis. The two circuit versions for the GM vehicles are available above (see FSW2-GM)