2012 Honda CR-V RVing FuseSwitch

2012 Honda CR-V RVing FuseSwitch

The following picture gallery shows the basic steps to install a RVing FuseSwitch(Tm) on 2012 Honda CR-V. Watch the installation video first, and use its guidance to select the location of the RVing FuseSwitch(Tm) in the car. To view a picture, click on it. To see the next picture, click on the arrow on right side of that picture.

2012 Honda CRV

Remove the rubber weatherstripping in the area of the panel to be removed

Remove the rubber wea...

With the panel removed, locate the fuse(s) to be removed, Insert RVing FuseSwitch(Tm) into fuse location

With the panel remove...

The RVing FuseSwitch(Tm) leads are inserted into fuse slot where the fuse was removed (4th on second row)

The RVing FuseSwitch(...

Select Location for the RVing FuseSwitch on the panel in the 'Open Hole' that is formed into panel

Select Location for t...

Select the exact location to place the switch in this 'hole' in the dash panel

Select the exact loca...

Drill a 3/4 inch hole, install the switch with the White Dot up then connect the wiring to it

Drill a 3/4 inch hole...

Reinstall the panel & installation is complete.

Reinstall the panel &...

The reinstalled Panel with the RVing FuseSwitch(Tm) installed

The reinstalled Panel...